Ferrofish Verto 32

Wishlist

0 Cart € 0,00

Categories: Converter, Recording Brand: Ferrofish

Ferrofish Verto 32

VERTO 32 – 32×32 channel ADAT Dante converter

Dantify your equipment!

Seamless integration of up to 2 x 4 ADAT devices into the fastest growing Audio-over-IP Eco System.

€ 999,00

Dante is the de facto standard for networking audio equipment. With the Ferrofish Verto 32 it’s now possible to easily integrate up to 32 x 32 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 32 makes all channels immediately avalilable in the network: “plug and play”.

The ultra compact device has 8 ADAT connectors: 4 for transmitting, and 4 for receiving digital data (8 channels each).

On the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 32 supports up to 96kHz sample rate, MIDI jacks for control, and BNC wordclock jacks for external synchronization.

Two other Verto versions are available:
64×64 ADAT Interfaces: VERTO 64
64×64 MADI Interfaces: VERTO MX

An additional 19″ rack mount kit is available here.

Dante Plug & Play

Integrate the Ferrofish Verto 32 seamlessly into your Dante network. Just plug it in and the device is visible on the network and ready to be routed freely using the Dante Controller software. Together with the Dante Virtual Soundcard, also from Audinate, the Verto 32 turns into a high channel ADAT audio interface.

Additional features

The VERTO 32 is equipped with a MIDI port and two BNC wordclock connectors. This way an external Wordclock can be fed to the Dante network, or the Dante wordclock can be used for external devices.

Dante I/O;	– 2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network – 64 x 64 channel I/O (Dante Brooklyn II board built-in)
MADI I/O (AES10):	VERTO 32: 4x ADAT Input + 4x ADAT Output, optical TOSLINK Channel count: – 32×32 channels at 48kHz, – 16×16 channels at 96kHz VERTO 64: 8x ADAT Input + 8x ADAT Output, optical TOSLINK Channel count: – 64×64 channels at 48kHz – 32×32 channels at 96kHz
MIDI I/O:	2 x DIN 5-pin connectors for updating the unit
Wordclock I/O:	– BNC: 1 x input, 1 x output – 75 Ohm Termination set by default (switchable via Dante)
Power Supply:	14.4VA (1.2A at 12V) – Polyfuse internal, self-resetting – 1 x power supply included
Operation:	– Temperature range: 41°F up to 113°F (+5°C up to +45°C) – Humidity: <75%, non-condensing
Weight/Size:	– Weight: 0,9 kg – Dimensions: 22 x 9 x 4,5 mm (without rack ears)
Optional accessories:	– 19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space) – Multi-range Power Supply 12V (EU) – ADAT Cable Locking Plate (Part. No. 7027)